TM 5-3805-293-23-4
0180
INSTALLATION CONTINUED
18. Connect front attachment wiring harness connector (Figure 18, Item 17) to steering cylinder connector
(Figure 18, Item 16).
19. Install two clamps (Figure 18, Item 5), washers (Figure 18, Item 9), and bolts (Figure 18, Item 10) on front
attachment wiring harness (Figure 18, Item 2) and front frame (Figure 18, Item 1).
20. Install front attachment wiring harness connector (Figure 18, Item 8) on clip (Figure 18, Item 6).
21. Disconnect steering oil temperature sensor (Figure 18, Item 7) from front attachment wiring harness connector
(Figure 18, Item 8).
22. Connect six front attachment wiring harness connectors (Figure 18, Item 3) to front frame valve bank
(Figure 18, Item 4).
23. Reposition hoses (Figure 18, Item 15) and install two plates (Figure 18, Item 11), spacer (Figure 18, Item 14),
washer (Figure 18, Item 13), and bolt (Figure 18, Item 12) on hoses (Figure 18, Item 15).
Figure 18. Right Front Frame Valve Bank Connections.
0180