TM 5-3805-293-23-4
0176
DISASSEMBLY
000176
N OT E
Note position of elbow prior to removal to aid in installation.
1. Remove fitting (Figure 3, Item 1) and O-ring (Figure 3, Item 2) from filter base (Figure 3, Item 3). Discard
O-ring.
2. Remove fitting (Figure 3, Item 7), O-ring (Figure 3, Item 6), elbow (Figure 3, Item 5) and O-ring (Figure 3,
Item 4) from filter base (Figure 3, Item 3). Discard O-rings.
3. Remove dust cap (Figure 3, Item 10), valve (Figure 3, Item 9) and O-ring (Figure 3, Item 8) from filter base
(Figure 3, Item 3). Discard O-ring.
4. Remove pressure switch (Figure 3, Item 11) and O-ring (Figure 3, Item 12) from filter base (Figure 3, Item 3).
Discard O-ring.
Figure 3. Secondary Steering Filter Base.
0176
END OF TASK
CLEANING AND INSPECTION
000176
Clean and inspect all components IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK