TM 5-3805-293-23-4
0176
REMOVAL
000176
N OT E
Tag and mark all lines and wires to aid in installation.
1. Remove hydraulic steering oil filter (Figure 1, Item 1) from filter base (Figure 1, Item 2).
2. Remove two hydraulic lines (Figure 1, Item 4) and O-rings (Figure 1, Item 3) from filter base (Figure 1, Item 2).
Discard O-rings.
3. Remove nut (Figure 1, Item 5) and sensor wire (Figure 1, Item 6) from filter base (Figure 1, Item 2).
Figure 1. Hydraulic Steering Oil Filter.
0176
4. Remove four bolts (Figure 2, Item 1), washers (Figure 2, Item 3), ground connection (Figure 2, Item 2), and
filter base (Figure 2, Item 4) from rear frame (Figure 2, Item 5).
Figure 2. Hydraulic Steering Oil Filter Base.
0176
END OF TASK