TM 5-3805-293-23-4
0173
REMOVAL CONTINUED
7. Remove two bolts (Figure 4, Item 3), nuts (Figure 4, Item 7), four washers (Figure 4, Item 4), spacer (Figure 4,
Item 6), and four clamps (Figure 4, Item 5) from fuel supply lines (Figure 4, Item 2).
8. Remove fuel injection pump supply line (Figure 4, Item 8) and O-ring (Figure 4, Item 14) from fuel injection
pump (Figure 4, Item 1). Discard O-ring.
9. Remove bolt (Figure 4, Item 11), washer (Figure 4, Item 12), clip (Figure 4, Item 10), and spacer (Figure 4,
Item 13) from bracket (Figure 4, Item 9).
0173