TM 5-3805-293-23-4
0169
DISASSEMBLY
000169
1. Remove two fittings (Figure 7, Item 5) and O-rings (Figure 7, Item 6) from cylinder housing (Figure 7, Item 1).
Discard O-rings.
2. Remove boot (Figure 7, Item 4) from cylinder rod (Figure 7, Item 3).
3. Loosen head (Figure 7, Item 2) and remove cylinder rod (Figure 7, Item 3) from cylinder housing (Figure 7,
Item 1).
Figure 7. Cylinder Rod.
0169
4. Remove retaining ring (Figure 8, Item 1), magnet (Figure 8, Item 2) and carrier (Figure 8, Item 3) from cylinder
rod (Figure 8, Item 6).
5. Remove wear ring (Figure 8, Item 9) and seal (Figure 8, Item 8) from piston (Figure 8, Item 5). Discard wear
ring and seal.
6. Remove locknut (Figure 8, Item 4), piston (Figure 8, Item 5) and head (Figure 8, Item 7) from cylinder rod
(Figure 8, Item 6). Discard locknut.
Figure 8. Magnet, Piston and Head.
0169