TM 5-3805-293-23-3
0165
INSTALLATION CONTINUED
10. Install two new O-rings (Figure 15, Item 2), fitting (Figure 15, Item 1) and connect hose (Figure 15, Item 14) to
AWD piston motor (Figure 15, Item 8).
11. Install new O-ring (Figure 15, Item 4), hose (Figure 15, Item 9), two clamps (Figure 15, Item 7), four washers
(Figure 15, Item 6), and bolts (Figure 15, Item 5) on AWD piston motor (Figure 15, Item 8).
12. Install new O-ring (Figure 15, Item 13), hose (Figure 15, Item 3), two clamps (Figure 15, Item 12), four washers
(Figure 15, Item 11), and bolts (Figure 15, Item 10) on AWD piston motor (Figure 15, Item 8).
Figure 15. All-Wheel Drive Piston Motor Lines.
0165
Change 1