TM 5-3805-293-23-3
0142
REMOVAL CONTINUED
76. Install 12 bolts (Figure 30, Item 1) and two engine support brackets (Figure 30, Item 2) on engine (Figure 30,
Item 4).
a. Adjust bracket so that engine is level.
b. Remove pin (Figure 30, Item 3) and use lifting device to adjust engine height.
c.
Reinstall pin (Figure 30, Item 3) in support bracket (Figure 30, Item 2).
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure any lifting device used is in good condition and of
suitable load capacity. Keep clear of heavy parts supported only by lifting device. Failure
to follow this warning may cause injury or death to personnel.
N OT E
The engine weighs approximately 2,000 lb (907 kg).
77. Using lifting device, lower transmission until engine is supported by brackets.
Figure 30. Engine Support Brackets.
0142
