4
TM 5-3805-293-23-3
FIELD MAINTENANCE
-
TRANSMISSION ECM REPLACEMENT
0
137
Removal, Disassembly, Assembly, Installation
INITIAL SETUP
Equipment Condition
Tools and Special Tools
0
0
Tool Kit, General Mechanic's
Machine parked (TM 5-3805-293-10)
0
(WP 0354, Item 83)
Battery cables disconnected (WP 0194)
0
0
References
Drawings Required
0
0
WP 0008
0
TM 5-3805-293-24P, Figure 61
0
Estimated Time to Complete
0
2.5 Hr
0
REMOVAL
000137
1. Record all diagnostic codes and save the electronic control module (ECM) configuration data. Refer to
WP 0008.
2. Loosen two bolts (Figure 1, Item 2) and disconnect two connectors (Figure 1, Item 3) from ECM (Figure 1,
Item 1).
3. Remove two bolts (Figure 1, Item 8), ground strap (Figure 1, Item 6), plate (Figure 1, Item 9), and washers
(Figure 1, Item 7) from ECM (Figure 1, Item 1).
4. Remove two bolts (Figure 1, Item 5) and washers (Figure 1, Item 4) from ECM (Figure 1, Item 1). Remove
ECM from machine.
Figure 1. Transmission ECM.
0137
END OF TASK
