TM 5-3805-293-23-3
0136
INSTALLATION CONTINUED
2. Position left-hand sensor harness (Figure 8, Item 1) on machine. Connect left-hand sensor harness to harness
connector (Figure 8, Item 2).
3. Install four clamps (Figure 8, Item 5), three washers (Figure 8, Item 4) and bolts (Figure 8, Item 3) on front axle
(Figure 8, Item 6).
Figure 8. Left-Hand Sensor Harness Connector.
0136
4. Connect right-hand sensor harness (Figure 9, Item 1) to steering position sensor (Figure 9, Item 2).
Figure 9. Right-Hand Sensor Harness and Plug.
0136
