TM 5-3805-293-23-3
0133
REMOVAL CONTINUED
WARN I N G
Lubricating oil is very slippery. Immediately wipe up any spills. Failure to follow this
warning may cause injury to personnel.
N OT E
Tag and mark lines to aid in installation.
Plug or cap all lines to prevent contamination.
2. Remove bolt (Figure 2, Item 6), washer (Figure 2, Item 5), clamp (Figure 2, Item 4) and grommet (Figure 2,
Item 3) from hose (Figure 2, Item 1).
3. Remove bolt (Figure 2, Item 8), washer (Figure 2, Item 7), clamp (Figure 2, Item 10) and grommet (Figure 2,
Item 9) from hose (Figure 2, Item 2).
4. Disconnect hose (Figure 2, Item 1) from wheel lean cylinder (Figure 2, Item 13) and remove O-ring (Figure 2,
Item 11). Discard O-ring.
5. Disconnect hose (Figure 2, Item 2) from wheel lean cylinder (Figure 2, Item 13) and remove O-ring (Figure 2,
Item 12). Discard O-ring.
Figure 2. Wheel Lean Cylinder Hose.
0133