TM 5-3805-293-23-3
0131
REMOVAL
000131
WARN I N G
Lubricating oil is very slippery. Immediately wipe up any spills. Failure to follow this
warning may cause injury to personnel.
N OT E
Tag and mark lines to aid in installation.
Cap or plug all lines.
1. Disconnect tube (Figure 1, Item 1) and remove O-ring (Figure 1, Item 13) from housing (Figure 1, Item 12).
Discard O-ring.
2. Disconnect tube (Figure 1, Item 1) and remove O-ring (Figure 1, Item 3) from differential lock control valve
(Figure 1, Item 4). Discard O-ring.
3. Remove tube (Figure 1, Item 1) from machine.
4. Disconnect tube (Figure 1, Item 10) from differential lock control valve (Figure 1, Item 4). Discard O-ring.
5. Disconnect tube (Figure 1, Item 10) and remove two O-rings (Figure 1, Item 9) from housing (Figure 1,
Item 12). Discard O-rings.
6. Remove tube (Figure 1, Item 10) from machine.
7. Disconnect hose (Figure 1, Item 5) and remove O-ring (Figure 1, Item 6) from differential lock control valve
(Figure 1, Item 4). Discard O-ring.
8. Disconnect wiring harness connector (Figure 1, Item 2) from differential lock control valve (Figure 1, Item 4).
9. Remove two bolts (Figure 1, Item 7) washers (Figure 1, Item 8) and differential lock control valve (Figure 1,
Item 4) from bracket (Figure 1, Item 11).
0131-2
