TM 5-3805-293-23-3
0129
REMOVAL
000129
1. Remove bolt (Figure 1, Item 5), washer (Figure 1, Item 4), spacer (Figure 1, Item 9) and two clamps (Figure 1,
Item 8) from power take-off line (Figure 1, Item 2).
2. Disconnect power take-off line (Figure 1, Item 2) and remove O-ring (Figure 1, Item 3) from flywheel housing
(Figure 1, Item 1). Discard O-ring.
3. Disconnect power take-off line (Figure 1, Item 2) and O-ring (Figure 1, Item 7) from transmission hydraulic
manifold (Figure 1, Item 6). Remove power take-off line from machine. Discard O-ring.
Figure 1. Power Take-Off Line.
0129
END OF TASK
INSPECTION
000129
Inspect all parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK