TM 5-3805-293-23-3
0129
INSTALLATION
000129
1. Position power take-off line (Figure 1, Item 2) on machine. Install new O-ring (Figure 1, Item 7) and connect
power take-off line to transmission hydraulic manifold (Figure 1, Item 6).
Install new O-ring (Figure 1, Item 3) and connect power take-off line (Figure 1, Item 2) to flywheel housing
2.
(Figure 1, Item 1).
3. Install two clamps (Figure 1, Item 8), spacer (Figure 1, Item 9), washer (Figure 1, Item 4) and bolt (Figure 1,
Item 5) on power take-off line (Figure 1, Item 2).
END OF TASKS
FOLLOW-ON TASKS
000129
Install engine enclosure (WP 0225).
END OF TASK
END OF WORK PACKAGE
0129-3/(4 blank)
