TM 5-3805-293-23-3
0074
REMOVAL CONTINUED
b. Loosen locking screw (Figure 2, Item 3) on fuel injection pump (Figure 2, Item 1).
N OT E
The locking tab has two different diameter holes. The wider hole allows the locking screw
to go deeper in the pump bore to lock the pump shaft. The narrow portion keeps the
locking screw off the pump shaft, allowing it to rotate freely.
c.
Slide locking tab (Figure 2, Item 2) to lock position.
d. Torque locking screw (Figure 2, Item 3) to 80 lb-in. (9 Nm).
0074