TM 5-3805-293-23-3
0063
REMOVAL CONTINUED
N OT E
If removing cylinder head, reinstall two bolts on engine lifting bracket and hand tighten
only.
14. Remove two bolts (Figure 4, Item 2) and washers (Figure 4, Item 3) from engine lifting bracket (Figure 4,
Item 1).
15. Remove two bolts (Figure 4, Item 4) and washers (Figure 4, Item 5) from mounting bracket (Figure 4, Item 6).
16. Remove mounting bracket (Figure 4, Item 6) from engine.
Figure 4. Engine Lifting and Mounting Brackets.
0063
END OF TASK
CLEANING AND INSPECTION
00063
Clean and inspect all mechanical parts IAW Mechanical General Maintenance Instructions (WP 0346).
END OF TASK
INSTALLATION
00063
1. Loosely install mounting bracket (Figure 4, Item 6) two washers (Figure 4, Item 5) and bolts (Figure 4, Item 4)
on engine.
2. Loosely install two washers (Figure 4, Item 3) and bolts (Figure 4, Item 2) on engine lifting bracket (Figure 4,
Item 1).