TM 5-3805-293-23-3
0057
REMOVAL CONTINUED
2. Remove hose (Figure 2, Item 13) and O-ring (Figure 2, Item 14) from cooling fan and fan gear motor assembly
(Figure 2, Item 2). Discard O-ring.
3. Remove nut (Figure 2, Item 8), washer (Figure 2, Item 7), bolt (Figure 2, Item 12), washer (Figure 2, Item 11),
hose clamp (Figure 2, Item 10), and spacer (Figure 2, Item 9), from cooling fan and gear motor assembly
(Figure 2, Item 2).
4. Disconnect hose (Figure 2, Item 15) and remove O-ring (Figure 2, Item 1) from cooling fan and fan gear motor
assembly (Figure 2, Item 2). Discard O-ring.
5. Remove bolt (Figure 2, Item 16) and hose clamp (Figure 2, Item 17) from machine.
6. Disconnect hose (Figure 2, Item 4), and remove O-ring (Figure 2, Item 3) from cooling fan and fan gear motor
assembly (Figure 2, Item 2). Discard O-ring.
WARN I N G
Use extreme caution when handling heavy parts. Provide adequate support and use
assistance during procedure. Ensure that any lifting equipment used is in good condition
and of suitable load capacity. Keep clear of heavy parts supported by lifting equipment.
Failure to follow this warning may result in death or injury to personnel.
N OT E
Fan and fan gear motor assembly weigh approximately 70 lb (32 kg).
7. With assistance, remove four bolts (Figure 2, Item 6) and washers (Figure 2, Item 5) from fan and fan gear
motor assembly (Figure 2, Item 2) and place on flat surface.
Figure 2. Fan and Fan Gear Motor Assembly.
0057
