• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 1. AWD Charge Pressure.
Figure 73. Wheel Lean Lock Bolt.

Maintenance Manual For Motorized Road Grader Model 120M - 3
Page Navigation
  56    57    58    59    60  61  62    63    64    65    66  
img
. . . .
TM 5-3805-293-23-3
0043
PISTON PUMP CHARGE PRESSURE TEST CONTINUED
00043
22. Perform the following steps if the following conditions occur: low charge pressure for either pump and no
increase in charge pressure with the increase in the engine speed.
a. Replace AWD filter (WP 0200).
b. Perform Piston Pump Charge Pressure Test again. If pressures remain low, replace transmission oil filter
lines (WP 0142).
c.
Perform Piston Pump Charge Pressure Test again. If pressures remain low, replace AWD pump (WP
0116).
23. Lower blade (Figure 72, Item 1) until front axle is raised above vehicle support stands (Figure 72, Item 3).
24. Remove vehicle support stands (Figure 72, Item 3) and lower blade (Figure 72, Item 1) until front tires (Figure
72, Item 2) are on the ground.
Figure 72. Lift Front Wheels.
0043
0043-61


Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved.