TM 5-3805-293-23-3
0043
FILL TIME FOR THE TRANSMISSION CLUTCH CALIBRATED CONTINUED
Electronic Technician (ET) is used to access the calibration procedures. A message on the ET screen will give
instructions that guide the user through the calibration procedure.
8. Connect MSD to machine (WP 0006) and from available ECM(s), select Trans/Chassis 120M (Figure 32,
Item 1). Select SERVICE (Figure 32, Item 2) and CALIBRATIONS (Figure 32, Item 3) from drop-down menu
and select TRANSMISSION FILL CALIBRATION (Figure 32, Item 4).
Figure 32. Calibrations Screen.
0043