TM 5-3805-293-23-2
0034
CAN DATA LINK CIRCUIT TEST CONTINUED
55. Turn the battery disconnect switch and ignition switch to the ON position.
56. Select the Connect Icon (Figure 32, Item 1) at top of screen.
57. Observe ECMs from the popup window (Figure 32, Item 5). Implement 120M (Figure 32, Item 2) and five other
ECMs should be displayed.
a. If Implement 120M (Figure 32, Item 2) is not displayed, select the Cancel button (Figure 32, Item 3).
Replace Implement #1 ECM (WP 0268).
b. If Implement 120M (Figure 32, Item 2) is displayed, select the OK button (Figure 32, Item 4) proceed to
step 58.
Figure 32. ET Connect Icon and ECM Selection.
0034