TM 5-3805-293-23-2
0031
Table 1. Implement Code (2200-00 TO 2954-14) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2200-08 Left Steering Cylin-
Resistance 5.0 Ohms or Greater -
der Position Sensor Abnor-
Left steering cylinder position sensor
mal Frequency, Pulse Width
harness is open, replace left steering
or Period - Continued
position sensor harness (WP 0136).
Connect the front chassis wiring
harness connector U-C36 (WP 0009,
Figure 188) to cab lower wiring
harness P-C151 (WP 0009, Figure
189) (WP 0180).
Connect the cab lower wiring harness
connector P-C39 (WP 0006, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Connect the rear chassis wiring
harness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring
harness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
3. Using the MSD (WP 0006), select 2200-08 Code Active - Repeat
Implement 120M and verify 2200- troubleshooting code from the
08 is not active.
beginning.
2200-08 Code Not Active -
Troubleshooting complete.
0031-37
