TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
22. One Or Both Rear Flood
6. Disconnect rear lamps harness
Lamps Do Not Operate,
connector AG-C2 (WP 0009, Fig-
Both Front and Middle
ure 312) from left rear flood lamp
Flood Lamps Operate
(WP 0207).
Normally - Continued
7. Turn battery disconnect switch
and ignition switch to the ON posi-
tion (TM 5-3805-293-10).
8. Remove fuse F2 (TM 5-3805-293- Fuse Open - Proceed to step 9.
10) from fuse panel and inspect
Fuse OK - Install new fuse in fuse
for open fuse.
panel F2 (TM 5-3805-293-10) and
replace left rear flood lamp (WP
0207).
Proceed to step 23.
9. Turn battery disconnect switch to
the OFF position (TM 5-3805-
293-10).
10. Disconnect rear lamps harness
connector AG-C12 (WP 0009,
Figure 312) from right rear flood
lamp (WP 0207).
11. Install new fuse in fuse panel F2
(TM 5-3805-293-10).
12. Turn battery disconnect switch
and ignition switch to the ON posi-
tion (TM 5-3805-293-10).
13. Remove fuse F2 (TM 5-3805-293- Fuse Open - Proceed to step 14.
10) from fuse panel and inspect
Fuse OK - Install new fuse in fuse
for open fuse.
panel F2 (TM 5-3805-293-10) and
replace right rear flood lamp (WP
0207).
Connect rear lamps harness connec-
tor AG-C2 (WP 0009, Figure 312) to
left rear flood lamp (WP 0207).
Connect rear lamps harness connec-
tor AG-C12 (WP 0009, Figure 312) to
right rear flood lamp (WP 0207).
Proceed to step 23.
14. Remove rear flood relay (WP
0009, Figure 306) from rear flood
relay socket (WP 0009, Figure
307).
15. Turn ignition switch and battery
disconnect switch to the OFF
position (TM 5-3805-293-10).
0023-140
