TM 5-3805-293-23-2
0023
Table 1. Cab Electrical Troubleshooting Procedures - Continued.
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
22. One Or Both Rear Flood
Resistance 5.0 Ohms Or Less -
Lamps Do Not Operate,
Remove jumper wire from relay
Both Front and Middle
nector P-C69 (WP 0009, Figure
socket C3 and E3 (WP 0009, Figure
Flood Lamps Operate
46) terminal 29 and terminal 69.
307), and replace rear flood relay.
Normally - Continued
Install fuse F2 (TM 5-3805-293-10) in
5.0 ohms.
fuse panel.
Connect rear chassis wiring harness
connector FA-C22 (WP 0009, Figure
47) to cab lower wiring harness con-
nector P-C69 (WP 0009, Figure 46).
Connect rear lamps harness connec-
tor AG-C2 (WP 0009, Figure 312) to
left rear flood lamp (WP 0207).
Connect rear lamps harness connec-
tor AG-C12 (WP 0009, Figure 312) to
right rear flood lamp (WP 0207).
Connect rear lamps wiring harness
connector A-C20 (WP 0009, Figure
311) to rear chassis wiring harness
connector FA-C29 (WP 0009, Figure
310).
Proceed to step 17.
Replace cab lower wiring harness
(WP 0266).
Remove jumper wire from relay
socket C3 and E3 (WP 0009, Figure
307), and install rear flood relay.
Install fuse F2 (TM 5-3805-293-10) in
fuse panel.
Connect rear chassis wiring harness
connector FA-C22 (WP 0009, Figure
47) to cab lower wiring harness con-
nector P-C69 (WP 0009, Figure 46).
Connect rear lamps harness connec-
tor AG-C2 (WP 0009, Figure 312) to
left rear flood lamp (WP 0207).
Connect rear lamps harness connec-
tor AG-C12 (WP 0009, Figure 312) to
right rear flood lamp (WP 0207).
Connect rear lamps wiring harness
connector A-C20 (WP 0009, Figure
311) to rear chassis wiring harness
connector FA-C29 (WP 0009, Figure
310).
Proceed to step 17.
0023-145