TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-04 Right Steering Cyl-
Test Step 6. Test for Shorted Front
inder Position Sensor Volt-
Attachment Wiring Harness.
age Below Normal -
1. Disconnect the right steering cyl-
Continued
inder position sensor wiring har-
ness connector UC-C1 (WP 0009,
Figure 198) from front attachment
wiring harness U-C58 (WP 0009,
Figure 153) (WP 0136).
2. Using digital multimeter, measure
Continuity - Right steering cylinder
resistance between right steering
position sensor harness is shorted,
cylinder position sensor wiring
replace right steering position sensor
harness connector UC-C1 (WP
harness (WP 0136).
0009, Figure 198) terminal 3 and
Connect the front attachment wiring
machine ground. There should be
harness connector U-C1 (WP 0009,
no continuity.
Figure 121) to cab lower wiring har-
ness P-C50 (WP 0009, Figure 120)
(WP 0180).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Connect the cab lower wiring harness
connector P-C41 (WP 0009, Figure
68) to implement ECM J-1 (WP 0009,
Figure 69) (WP 0268).
Connect the rear chassis wiring har-
ness connector FA-C21 (WP 0009,
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Connect the rear chassis wiring har-
ness connector FA-C22 (WP 0009,
Figure 47) to cab lower wiring harness
P-C69 (WP 0009, Figure 46).
Proceed to step 3.
0020-102
