TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2201-04 Right Steering Cyl-
4. Connect the steering position
inder Position Sensor Volt-
sensor harness UA-C2 (WP 0009,
age Below Normal -
Figure 192) to left steering posi-
Continued
tion sensor (WP 0009, Figure
193) (WP 0169).
5. Disconnect the rear chassis wir-
ing harness connector FA-C21
(WP 0009, Figure 124) from
transmission ECM J2 (WP 0009,
Figure 112).
6. Disconnect the cab lower wiring
harness connector P-C39 (WP
0009, Figure 70) from implement
ECM J-2 (WP 0009, Figure 71)
(WP 0268).
7. Disconnect the cab lower wiring
harness connector P-C41 (WP
0009, Figure 68) from implement
ECM J-1 (WP 0009, Figure 69)
(WP 0268).
8. Using digital multimeter, measure
Continuity - Proceed to Test Step 4.
resistance between rear chassis
No Continuity - Proceed to Test Step
wiring harness connector FA-C21
7.
(WP 0009, Figure 124) terminal
16 and machine ground. There
should be no continuity.
0020-99
