TM 5-3805-293-23-2
0020
Table 1. Transmission Code (2113-03 TO 2304-06) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2199-03 Secondary Steering
2. Using digital multimeter, test for
Continuity - Proceed to Test Step 4.
Request Signal Line Voltage
continuity between rear chassis
No Continuity - Replace transmis-
Above Normal - Continued
wiring harness connector FA-C21
sion ECM (WP 0137).
(WP 0009, Figure 124) terminal
Connect the cab lower wiring harness
25, and all other terminals. There
connector P-C39 (WP 0009, Figure
should be no continuity.
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2199-03 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2199-03 is not active.
2199-03 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) (WP 0188)
from cab lower wiring harness
connector P-C69 (WP 0009, Fig-
ure 46).
2. Using digital multimeter, test for
Continuity - Cab lower wiring har-
continuity between cab lower wir-
ness is shorted, replace cab lower wir-
ing harness connector P-C69
ing harness (WP 0266).
(WP 0009, Figure 46) terminal 12,
Connect the rear chassis wiring har-
and all other terminals. There
ness connector FA-C21 (WP 0009,
should be no continuity.
Figure 124) to transmission ECM J2
(WP 0009, Figure 112).
Proceed to step 3.
No Continuity - Rear chassis wiring
harness is shorted, replace rear chas-
sis wiring harness (WP 0188).
Connect the cab lower wiring harness
connector P-C39 (WP 0009, Figure
70) to implement ECM J-2 (WP 0009,
Figure 71) (WP 0268).
Proceed to step 3.
3. Using the MSD (WP 0006), select
2199-03 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
2199-03 is not active.
2199-03 Code Not Active - Trouble-
shooting complete.
0020-33