TM 5-3805-293-23-1
0019
Table 1. Transmission Code (1471-02 to 1961-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1674-04 Solenoid Return #1 Test Step 3. Test for Shorted Front
Voltage Below Normal - Con- Chassis Wiring Harness.
tinued
1. Disconnect the front chassis wir-
ing harness connector U-C36
(WP 0009, Figure 188) from cab
lower wiring harness connector P-
C151 (WP 0009, Figure 189).
2. Using digital multimeter, test for
Continuity - Front chassis wiring har-
continuity between front chassis
ness is shorted, replace front chassis
wiring harness connector U-C36
wiring harness (WP 0183).
(WP 0009, Figure 188) terminal 5
Connect the rear chassis wiring har-
and machine ground. There
ness connector FA-C22 (WP 0009,
should be no continuity.
Figure 47) to cab lower wiring harness
connector P-C69 (WP 0009, Figure
46).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Proceed to step 3.
No Continuity - Cab Lower wiring
harness is shorted, replace cab Lower
wiring harness (WP 0266).
Connect the rear chassis wiring har-
ness connector FA-C20 (WP 0009,
Figure 113) to transmission ECM J1
(WP 0009, Figure 112).
Connect the front chassis wiring har-
ness connector U-C40 (WP 0009, Fig-
ure 190) to secondary steering right
solenoid (WP 0009, Figure 191) (WP
0216).
Connect the front chassis wiring har-
ness connector U-C39 (WP 0009, Fig-
ure 186) to secondary steering left
solenoid (WP 0009, Figure 187) (WP
0216).
Proceed to step 3.
3. Using the MSD (WP 0006), select
1674-04 Code Active - Repeat trou-
Trans/chassis 120M and verify
bleshooting code from the beginning.
1674-04 is not active.
1674-04 Code Not Active - Trouble-
shooting complete.
0019-95
