TM 5-3805-293-23-1
0019
Table 1. Transmission Code (1471-02 to 1961-04) Troubleshooting Procedures - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
1471-03 Steering Control
5. Using the MSD (WP 0006), select
1471-03 Code Active - Repeat trou-
Position Sensor #1 Voltage
Trans/chassis 120M and verify
bleshooting code from the beginning.
Above Normal - Continued
1471-03 is not active.
1471-03 Code Not Active - Trouble-
shooting complete.
Test Step 3. Test for Shorted Rear
Chassis Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect the rear chassis wir-
ing harness connector FA-C21
(WP 0009, Figure 124) from
transmission ECM J2 (WP 0009,
Figure 112).
3. Disconnect the cab lower wiring
harness connector P-C39 (WP
0009, Figure 70) from implement
ECM J-2 (WP 0009, Figure 71)
(WP 0268).
4. Using digital multimeter, test for
Continuity - Proceed to Test Step 4.
continuity between rear chassis
No Continuity - Proceed to Test Step
wiring harness connector FA-C21
5.
(WP 0009, Figure 124) terminal
18, and all other terminals. There
should be no continuity.
Test Step 4. Test for Shorted Cab
Lower Wiring Harness.
1. Disconnect the rear chassis wir-
ing harness connector FA-C22
(WP 0009, Figure 47) (WP 0188)
from cab lower wiring harness
connector P-C69 (WP 0009, Fig-
ure 46).
0019-10