TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2321-02 Right Front Drive
Test Step 18. Test for Open Cab
Motor Speed Sensor #1
Lower Wiring Harness.
Data Erratic, Intermittent or
1. Using a digital multimeter, mea-
Resistance Less Than 5.0 Ohms -
Incorrect - Continued
Replace right front drive motor speed
sure resistance between P-C35
sensor (WP 0166).
terminal 3 (WP 0009, Figure 53)
and P-C34 terminal 9 (WP 0009,
Connect P-C27 (WP 0009, Figure
Figure 52).
74) on Implement 2 ECM J2 (WP
0009, Figure 75) (WP 0268).
Connect P-C45 (WP 0009, Figure
72) on Implement 2 ECM J1 (WP
0009, Figure 73) (WP 0268).
Connect P-C39 (WP 0009, Figure
70) on Implement 1 ECM J2 (WP
0009, Figure 71) (WP 0268).
Connect P-C41 (WP 0009, Figure
68) on Implement 1 ECM J1 (WP
0009, Figure 69) (WP 0268).
Connect P-C37 (WP 0009, Figure
55) on AWD ECM J2 (WP 0009, Fig-
ure 56) (WP 0270).
Connect P-C35 (WP 0009, Figure
53) on AWD ECM J1 (WP 0009, Fig-
ure 54) (WP 0270).
Connect AF-C3 (WP 0009, Figure
51) on P-C34 (WP 0009, Figure 52)
(WP 0200).
Install rear front frame cover on
machine (WP 0224).
Connect AF-C1 (WP 0009, Figure
61) on AH-C1 harness connector
(WP 0009, Figure 62).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 2.
Resistance 5.0 Ohms or Greater -
Replace cab lower wiring harness
(WP 0266).
Connect AF-C1 (WP 0009, Figure
61) on AH-C1 harness connector
(WP 0009, Figure 62).
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AH-C2 (WP 0009, Figure
57) on right front drive motor speed
sensor connector (WP 0009, Figure
58) (WP 0166).
Proceed to step 2.
0015-56
