TM 5-3805-293-23-1
0015
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2319-02 Left Front Drive
Test Step 15. Test for Short to
Motor Speed Sensor #1
Implement 2 Circuits in Cab Lower
Data Erratic, Intermittent or
Wiring Harness.
Incorrect - Continued
1. Disconnect cab lower wiring P-
C45 harness connector (WP
0009, Figure 72) from Implement
2 ECM J1 (WP 0009, Figure 73)
(WP 0265).
2. Disconnect cab lower wiring P-
C27 harness connector (WP
0009, Figure 74) from Implement
2 ECM J2 (WP 0009, Figure 75)
(WP 0265).
No Continuity - Proceed to step 4.
3. Using a digital multimeter, test for
continuity between P-C35 termi-
Continuity - Replace cab lower wir-
nal 7 (WP 0009, Figure 53) and
ing harness (WP 0266).
all circuits in P-C45 (WP 0009,
Connect AF-C2 (WP 0009, Figure
Figure 72). There should be no
63) on AK-C1 (WP 0009, Figure 64).
continuity.
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AK-C2 (WP 0009, Figure
59) on left front drive motor speed
sensor connector (WP 0009, Figure
60) (WP 0166).
Proceed to step 5.
4. Using a digital multimeter, test for
No Continuity - Proceed to Test
Step 16.
continuity between P-C35 termi-
nal 7 (WP 0009, Figure 53) and
Continuity - Replace cab lower wir-
all circuits in P-C27 (WP 0009,
ing harness (WP 0266).
Figure 74). There should be no
Connect AF-C2 (WP 0009, Figure
continuity.
63) on AK-C1 (WP 0009, Figure 64).
Install nose front frame cover and
rear front frame cover on machine
(WP 0224).
Connect AK-C2 (WP 0009, Figure
59) on left front drive motor speed
sensor connector (WP 0009, Figure
60) (WP 0166).
Proceed to step 5.
0015-16