TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2297-03 Right Front Drive
5.
Using a digital multimeter, test for
No Continuity - Proceed to Test Step
Pump Forward Control Sole-
continuity between P-C35 termi-
5.
noid Voltage Above Normal -
nal 51 (WP 0009, Figure 53) and
Continuity - Replace cab lower wiring
Continued
all circuits in P-C37 (WP 0009,
harness (WP 0266).
Figure 55). There should be no
Connect AC-C5 (WP 0009, Figure 78)
continuity.
on FA-C37 (WP 0009, Figure 79) (WP
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101) and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 6.
6. Using the MSD (WP 0006), select
2297-03 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2297-03 is not active.
2297-03 Code Not Active - Trouble-
shooting complete.
Test Step 5. Test Right Front Drive
Pump Forward Control Solenoid
Circuit for Short to Other Voltage
Source in Cab Lower Wiring Har-
ness.
1. Turn battery disconnect switch
and ignition switch to the ON posi-
tion.
0014-76
