TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2297-03 Right Front Drive
6. Using the MSD (WP 0006), select
2297-03 Code Active - Repeat trou-
Pump Forward Control Sole-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
noid Voltage Above Normal -
2297-03 is not active.
2297-03 Code Not Active - Trouble-
Continued
shooting complete.
Test Step 4. Test Right Front Drive
Pump Forward Control Solenoid
Circuit for Short to Other Circuits in
Cab Lower Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring P-
C35 harness connector (WP
0009, Figure 53) from AWD ECM
J1 (WP 0009, Figure 54) (WP
0270).
3. Disconnect cab lower wiring P-
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
4. Using a digital multimeter, test for
No Continuity - Proceed to step 5.
continuity between P-C35 termi-
Continuity - Replace cab lower wiring
nal 51 and all other circuits in P-
harness (WP 0266).
C35 (WP 0009, Figure 53). There
Connect AC-C5 (WP 0009, Figure 78)
should be no continuity.
on FA-C37 (WP 0009, Figure 79) (WP
0199).
Connect AX-C1 (WP 0009, Figure
100) on AC-C1 (WP 0009, Figure
101) and close access door.
Install front engine enclosure access
panel (WP 0226).
Proceed to step 6.
0014-75