TM 5-3805-293-23-1
0014
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2294-06 Right Front Drive
4. Using a digital multimeter, test for
No Continuity - Replace AWD ECM
Motor Solenoid Current
continuity between P-C35 termi-
(WP 0270).
Above Normal - Continued
nal 59 (WP 0009, Figure 53) and
Connect P-C41 (WP 0009, Figure 68)
all circuits in P-C27 (WP 0009,
on Implement 1 ECM J1 (WP 0009,
Figure 74). There should be no
Figure 69) (WP 0268).
continuity.
Connect P-C39 (WP 0009, Figure 70)
on Implement 1 ECM J2 (WP 0009,
Figure 71) (WP 0268).
Connect P-C45 (WP 0009, Figure 72)
on Implement 2 ECM J1 (WP 0009,
Figure 73) (WP 0268).
Connect P-C27 (WP 0009, Figure 74)
on Implement 2 ECM J2 (WP 0009,
Figure 75) (WP 0268).
Connect AF-C3 (WP 0009, Figure 51)
on P-C34 (WP 0009, Figure 52) (WP
0200).
Install rear front frame cover on
machine (WP 0224).
Connect AF-C5 (WP 0009, Figure 98)
on right front drive motor solenoid
(WP 0009, Figure 99).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 5.
Continuity - Replace cab lower wiring
harness (WP 0266).
Connect AF-C5 (WP 0009, Figure 98)
on right front drive motor solenoid
(WP 0009, Figure 99).
Install nose front frame cover and rear
front frame cover on machine (WP
0224).
Proceed to step 5.
5. Using the MSD (WP 0006), select
2294-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2294-06 is not active.
2294-06 Code Not Active - Trouble-
shooting complete.
0014-26