TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2191-06 Right All-Wheel
6. Using a digital multimeter, test for
No Continuity - Proceed to Test Step
Drive (AWD) Clutch Reverse
continuity between P-C37 termi-
4.
Solenoid Current Above
nal 6 (WP 0009, Figure 55) and
Continuity - Replace cab lower wiring
Normal - Continued
ground. There should be no conti-
harness (WP 0266).
nuity.
Connect AF-C9 (WP 0009, Figure 86)
on right AWD clutch reverse solenoid
(WP 0009, Figure 87).
Install nose front frame cover and rear
front frame cover on machine (WP
0224).
Proceed to step 7.
7. Using the MSD (WP 0006), select
2191-06 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2191-06 is not active.
2191-06 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test L949-GN Right
AWD Clutch REV Sol Circuit for
Short to Implement 1 Circuits in
Cab Lower Wiring Harness.
1. Disconnect cab lower wiring P-
C41 harness connector (WP
0009, Figure 68) from Implement
1 ECM J1 (WP 0009, Figure 69)
(WP 0268).
2. Disconnect cab lower wiring P-
C39 harness connector (WP
0009, Figure 70) from Implement
1 ECM J2 (WP 0009, Figure 71)
(WP 0268).
3. Using a digital multimeter, test for
No Continuity - Proceed to step 4.
continuity between P-C37 termi-
Continuity - Replace cab lower wiring
nal 6 (WP 0009, Figure 55) and all
harness (WP 0266).
circuits in P-C41 (WP 0009, Fig-
Connect AF-C9 (WP 0009, Figure 86)
ure 68). There should be no conti-
on right AWD clutch reverse solenoid
nuity.
(WP 0009, Figure 87).
Install nose front frame cover and rear
front frame cover on machine (WP
0224).
Proceed to step 5.
0013-96