TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2191-06 Right All-Wheel
Test Step 3. Test L949-GN Right
Drive (AWD) Clutch Reverse
AWD Clutch REV Sol Circuit for
Solenoid Current Above
Short to Other AWD Circuits in Cab
Normal - Continued
Lower Wiring Harness.
1. Turn ignition switch and battery
disconnect switch to the OFF
position.
2. Disconnect cab lower wiring P-
C35 harness connector (WP
0009, Figure 53) from AWD ECM
J1 (WP 0009, Figure 54) (WP
0270).
3. Disconnect cab lower wiring P-
C37 harness connector (WP
0009, Figure 55) from AWD ECM
J2 (WP 0009, Figure 56) (WP
0270).
4. Using a digital multimeter, test for
No Continuity - Proceed to step 5.
continuity between P-C37 termi-
Continuity - Replace cab lower wiring
nal 6 and all other circuits in P-
harness (WP 0266).
C37 (WP 0009, Figure 55). There
Connect AF-C9 (WP 0009, Figure 86)
should be no continuity.
on right AWD clutch reverse solenoid
(WP 0009, Figure 87).
Install nose front frame cover and rear
front frame cover on machine (WP
0224).
Proceed to step 7.
5. Using a digital multimeter, test for
No Continuity - Proceed to step 6.
continuity between P-C37 termi-
Continuity - Replace cab lower wiring
nal 6 (WP 0009, Figure 55) and all
harness (WP 0266).
circuits in P-C35 (WP 0009, Fig-
Connect AF-C9 (WP 0009, Figure 86)
ure 53). There should be no conti-
on right AWD clutch reverse solenoid
nuity.
(WP 0009, Figure 87).
Install nose front frame cover and rear
front frame cover on machine (WP
0224).
Proceed to step 7.
0013-95
