TM 5-3805-293-23-1
0013
Table 1. All-Wheel Drive (AWD) Code Troubleshooting - Continued.
CDI FMI CODE
TEST OR INSPECTION
CORRECTIVE ACTION
2190-05 Right All-Wheel
4.
Using a digital multimeter, mea-
Resistance Less Than 5.0 Ohms -
Proceed to Test Step 4.
Drive (AWD) Clutch Forward
sure resistance between P-C37
Solenoid Current Below Nor-
terminal 5 (WP 0009, Figure 55)
Resistance 5.0 Ohms or Greater -
mal - Continued
and P-C34 terminal 4 (WP 0009,
Replace cab lower wiring harness
Figure 52).
(WP 0266).
Connect AF-C7 (WP 0009, Figure 84)
on right AWD clutch forward solenoid
(WP 0009, Figure 85).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 5.
5. Using the MSD (WP 0006), select
2190-05 Code Active - Repeat trou-
All Wheel Drive 120M and verify
bleshooting code from the beginning.
2190-05 is not active.
2190-05 Code Not Active - Trouble-
shooting complete.
Test Step 4. Test A753-PU On/Off
Driver Return Circuit for High
Resistance or Open in Cab Lower
Wiring Harness.
1. Using a digital multimeter, mea-
Resistance 5.0 Ohms or Greater -
sure resistance between P-C37
Replace cab lower wiring harness
terminal 4 (WP 0009, Figure 55)
(WP 0266).
and P-C34 terminal 22 (WP 0009,
Connect AF-C3 (WP 0009, Figure 51)
Figure 52).
on P-C34 (WP 0009, Figure 52) (WP
0200).
Install rear front frame cover on
machine (WP 0224).
Connect AF-C7 (WP 0009, Figure 84)
on right AWD clutch forward solenoid
(WP 0009, Figure 85).
Install nose front frame cover on
machine (WP 0224).
Proceed to step 2.
0013-80