TM 5-3805-293-23-1
0011
Table 2. Engine Troubleshooting with Codes for the 120M Motor Grader - Continued.
CDI FMI CODE
ERROR/EVENT
CORRECTIVE ACTION
E360-1 Low Engine Oil Pres- 1. Using the Messenger (WP 0005),
Event Code E360-1 Present - Go to
sure
verify presence of event code
step 2.
E360-1.
2. Verify engine oil pressure is OK.
Oil Pressure Low - Repair as
Perform Low Engine Oil Pressure,
directed.
troubleshooting in this work pack-
age, Table 1.
E360-2 Low Engine Oil Pres- Possible Performance Effect:
sure
Engine ECM will derate engine
power by 17.0 percent per second
up to a 100 percent while the
event code is active.
ECM will generate a SPN 100-
FMI 01 event code on J1939 data
link. This will generate a warning
on display on instrument panel
while warning is active.
N OT E
The warning will be cancelled if the oil pressure rises 3 psi (21 kPa)
above set point for 20 seconds.
1. Using the Messenger (WP 0005),
Event Code E360-2 Present - Go to
verify presence of event code
step 2.
E360-2.
2. Verify engine oil pressure is OK.
Oil Pressure Low - Repair as
Perform Low Engine Oil Pressure,
directed.
troubleshooting in this work pack-
age, Table 1.
E360-3 Low Engine Oil Pres- System Response:
sure
ECM will generate a SPN 100-FMI 01
event code on J1939 data link. This
will generate a warning on display on
instrument panel while warning is
active.
Possible Performance Effect:
Engine ECM will derate engine power
by 17.0 percent per second up to a
100 percent while the event code is
active.
1. Using the Messenger (WP 0005),
Event Code E360-3 Present - Go to
verify presence of event code
step 2.
E360-3.
2. Verify engine oil pressure is OK.
Oil Pressure Low - Repair as
Perform Low Engine Oil Pressure
directed.
troubleshooting in this work pack-
age, Table 1.
0011-202
