TM 5-3805-293-10
0013
Table 1. Preventive Maintenance Checks and Services (PMCS)
with Lubrication Information - Continued.
LOCATION
ITEM TO
ITEM
MAN-
CHECK/
NOT FULLY MISSION
NO.
INTERVAL HOURS
SERVICE
PROCEDURE
CAPABLE IF:
97
Every 500
Service Brake c. Raise blade slightly (WP 0004).
(Cont.) Engine
Holding Ability
Hours or 3
Months
d. Depress transmission
modulator control (WP 0004).
e. Fully apply service brake (WP
f. Select FIFTH SPEED
FORWARD (WP 0004).
g. Set throttle Hold Mode switch to
MANUAL (WP 0004).
h. Push and hold top of throttle
SET/ACCEL switch to set engine at
high idle speed.
i. Gradually release transmission Service brakes do not hold.
modulator control. Machine should
not move and engine should stall.
98
Every 500
Parking Brake
WARN I N G
Engine
Holding Ability
Hours or 3
Months
Be ALERT for personnel in the area while operating
machine. Always check to ensure area is clear of person-
nel and obstructions before starting engine, moving
machine, or lowering or raising blade. Failure to follow this
warning may cause injury or death to personnel or dam-
age to equipment.
a. Test brakes on hard, packed
dirt.
b. Fasten seat belt before testing
brakes.
c. Position the machine on a slope
of 20 percent.
d. Engage parking brake control.
Release the service brake control.
e. If machine moves, notify Field
Parking brake does not
Level Maintenance.
hold.
0013-51
