TM 5-3805-293-10
0008
WARNING MESSAGE LABELS CONTINUED
WARNING DEFINITION
KEY
LABEL IDENTIFICATION
08
08
1
Lift Here
Identifies proper location to attach lift device to machine.
2
Do Not Operate
Do not operate or work on this machine unless you have read
and understand the instructions and warnings in this manual.
3
Unplanned Blade Movement
Personal injury could result from sudden movement of the
blade when the centershift lock pin is released. To prevent
unexpected blade movement and possible injury, lower the
blade to the ground before you unlock the centershift linkage.
See WP 0005 for complete instructions before releasing the
centershift lockpin.
4
Tie Down
Identifies proper location to attach tie-down to machine.
5
No Clearance
Stay back a safe distance. No clearance for a person in this
area when the machine turns. Severe injury or death from
crushing could occur.
6
Improper Connections for Jump
Explosion Hazard! Improper jumper cable connections can
cause an explosion resulting in serious injury or death.
Start Cables
Batteries may be located in separate compartments. Refer to
WP 0007 for the correct slave starting procedure.
0008-3
