TM 5-3805-293-10
0007
STOPPING ENGINE IF AN ELECTRICAL MALFUNCTION OCCURS
0007
1. Ensure parking brake is engaged.
2. Turn engine start switch to OFF position.
3. Turn battery disconnect switch (Figure 4, Item 1) to OFF position.
4. Notify Field Level Maintenance.
Figure 4. Battery Disconnect Switch.
0007
END OF TASK
MOVING MACHINE OUT OF DANGER
0007
The machine can be moved out of danger by allowing the operator to override steering alignment and parking
brake engagement.
WARN I N G
Driving through the parking brake will cause the front wheels to auto-align upon machine
movement. Avoid traveling excessive distances while driving through the parking brake.
Extreme heat and wear will severely shorten the life of the parking brake. The loss of the
parking brake system could result in injury or death to personnel.
C AU T I O N
Do not use wheel lean lock bolt and bracket to center the wheel lean of machine. Damage
to equipment may result.
N OT E
"1F" and "1R" are the only gears available to drive through the parking brake. Upshifting
will not change selected gear.
A warning category 3 will activate during machine movement. The event will be logged in
Messenger but the alarm should deactivate once the transmission control switch is
returned to NEUTRAL position.
0007-13