TM 5-3805-293-10
0007
SANDY OR DUSTY AREAS CONTINUED
Parking
0007
1. Park machine (WP 0005).
2. Perform all After PMCS checks and services (WP 0013).
3. Clean spouts on fuel containers and areas around filler cap and filler tube before adding fuel.
4. Cover windshield to guard against sand blasting.
END OF TASK
SALTWATER AREAS
0007
1. Keep the machine as clean as possible. Wash down with fresh water after use.
2. Inspect wiring connections closely for corrosion.
3. Keep lubrication points clean and well lubricated.
4. Check machine frequently for rust/corrosion. Clean and spot paint as necessary.
END OF TASK
HIGH ALTITUDES
0007
N OT E
Engine operates at less than peak performance at high altitudes.
1. Coolant level and engine indicators must be watched closely.
2. Add coolant if necessary.
END OF TASK
SNOW AND ICE
0007
1. Fuel tank should be kept full. Keep snow and ice away from fuel filler.
2. Clean snow away from outside indicators.
Driving
0007
1. Engage differential lock as required and accelerate slowly to avoid spinning tires.
2. Drive at slower speeds.
3. Give signals sooner.
4. Apply brakes sooner to give early warning of intention to stop. This will also help to avoid skidding.
5. Maintain double the normal distance from the machine ahead.
6. Keep windshields, mirrors, and lights clean and free of snow and ice.
7. If approaching a difficult stretch of road, stop and inspect road carefully before driving on it.
8. Select transmission gear range that best suits road condition.
Stopping
0007
1. Ease up on accelerator, leaving machine in gear.
2. Apply service brakes lightly and evenly. DO NOT pump service brake pedal.
3. Always avoid sudden braking.
0007-8
