TM 5-3805-293-10
0006
TRAVELING AND EARTH MOVING OPERATIONS CONTINUED
5. Set blade so toe is inside right front tire at desired width of flat bottom ditch.
Figure 69. Setting Blade.
0006
6. Lower right lift cylinder to set depth of cut.
Figure 70. Lowering Right Lift Cylinder.
0006
7. Raise left lift cylinder to set desired shoulder slope.
8. Lean front wheels to the left. Cut second "V" ditch to same depth or slightly above first one.
Figure 71. Raising Left Lift Cylinder and Leaning Wheels.
0006
0006-39
