TM 5-3805-293-10
0006
TRAVELING AND EARTH MOVING OPERATIONS CONTINUED
11. Circle the moldboard assembly to the right to the desired position.
12. Position the heel of the moldboard in front of the right rear tire.
Figure 62. Heel Position.
0006
13. Lower the toe to the desired degree of slope.
Figure 63. Positioning Blade.
0006
14. Lean wheels into the slope for a heavier cut, and away from the slope for a lighter cut.
Figure 64. Leaning Wheels IN for Heavier Cut.
0006
0006-36
