OIL PUMP - TM-5-3805-263-14P-2

TM-5-3805-263-14P-2 Grader Heavy Road Motorized Type I Nonsectionalized Type II Sectionalized Manual
Page Navigation
198

ENGINE DISASSEMBLY AND ASSEMBLY TM 5-3805-263-14&P-2 OIL PUMP 4. 5. 6. 7. 8. 9. 10. 11. Put clean engine on all of the parts of the oil pump. Install pressure relief valve (3), cover (4) and bolt (5) in the oil pump body assembly. Install gears and shafts (6) in the oil pump body assembly. Install spacer (7) and the two keys in shafts (6). Install two gears and scavenge pump body as- sembly (8). Install key (9), drive gear (11), the washer and bolt (10). Tighten the bolt to a torque of 32 ± 5 lb.ft. (43.4 ± 6.8 N·m). Install the bearing in the idler gear with tooling (B) until it is even with the outside surface of the gear. Install the idler gear. CAUTION The oil pump must turn freely by hand after it is assembled. end by: a) install oil pump 1-203

Privacy Statement
Press Release
Contact