ENGINEDISASSEMBLY AND ASSEMBLYTM 5-3805-263-14&P-2FUEL TRANSFER PUMP6.7.8.4.Be sure the O-ring seal is in position on connec-tor (7) and put 4L7464 Silicone Grease on theO-ring seal.5.Install seal (5), valve (6) and connector (7) inthe pump housing as shown. Tighten connector(7) to a torque of 55 ± 10 N•m (40 ± 7 lb.ft.).Install the ring on tappet (8). Install tappet (8),O-ring seal (12) guide (9) and rod (10) inguide (11). Put 4L7464 Silicone Grease on O-ring seal (12). Install guides (11) and (9) as aunit in the pump housing as shown.Install O-ring seal (13) in the pump housingand put 4L7464 Silicone Grease on the O-ringseal.Install seal (15) valve (19) and plate (16) inpiston ( 14) as shown. Install piston (14), O-ringseal (17) piston (20) and guide (2 I ) in guide(18) as shown. Install the O-ring seal on guide(18) and put 4L7464 Silicone Grease on O-ringseal ( 17) and the O-ring seal on guide (18).9. Install guide (18) in the pump housing asshown.1-164
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
