TM 5-3805-263-14&P-1
Operator’s Compartment
Warning Level 1
The first level of warning, only- the panel indicators
FLASH. The first level of warning is for the low fuel level
and the low alternator output.
1.
Alternator - When this fault indicator comes
ON, it indicates a malfunction in the charging -
circuit. The machine can be operated until
repairs can be made. However, if the electrical
accessories are used, the batteries will discharge rapidly.
Warning Level 2
At this level, the fault indicators will FLASH and the fault
light will BLINK.
The fault light alerts the operator of an immediate or
impending problem. The operator must reduce work
cycle to 3/4 load and maintain full engine RPM, to reduce
excessive temperatures.
If the indicators remain ON after 10 minutes of operation,
stop the engine. Have the necessary repairs made
before starting the engine again.
3.
Coolant Temperature - When this fault
indicator comes ON, the fault light will BLINK.
This indicates the engine coolant temperature is too
high.
4.
Hydraulic Oil Temperature - When this fault
indicator comes ON, the fault light will BLINK.
This indicates the hydraulic oil temperature is too high.
12
