TM 5-3805-263-14&P-1
Stand behind the tread and attach a self- attaching air
chuck when inflating a tire.
Servicing and changing tires and rims can be dangerous
and should be done only by trained personnel using
proper tools and procedures. If correct procedures are
not
followed
while
servicing
tires
and
rims,
the
assemblies could burst with explosive force and cause
serious personal injury or death.
Mounting and Dismouting
Mount and dismount the machine only where steps
and/or handholds are provided.
Use both hands and face the machine when mounting
and dismounting.
Never get on or off a moving machine. Never jump off
the machine.
Do not try to climb on or off the machine when carrying
tools or supplies. Use a hand line to pull equipment up
onto the platform.
Preparing to Start the Engine
Inspect the condition of the seat belt and mounting
hardware. Replace any damaged or worn parts.
Replace the seat belt regardless of appearance after
three years.
Adjust the seat so that full brake pedal travel can be
obtained with the operators back against the seat back.
Make sure the machine is equipped with a lighting
system as required by conditions.
Make sure all lights are working properly.
Make sure no one is working on, underneath or close to
the machine before starting the engine or beginning to
move the machine. Make sure the area is free of
personnel.
Starting the Engine
7