TM 5-3805-263-14&P-1
Cooling system conditioner contains alkali.
Avoid contact with the skin and eyes and do not drink, to
prevent personal injury.
Allow cooling system components to cool before
draining.
Hot oil and components can cause personal injury. Do
not allow hot oil or components to contact the skin.
At operating temperature, the hydraulic tank is hot and
can be under pressure.
Remove the hydraulic tank filler cap only after the engine
has been stopped and the filler cap is cool enough to
remove with your bare hand.
Remove the hydraulic tank filler cap slowly to relieve
pressure.
Relieve all pressure in air, oil, fuel or cooling systems
before
any
lines,
fittings
or
related
items
are
disconnected or removed.
Battery electrolyte contains acid and can cause injury.
Avoid contact with the skin and eyes.
Fire or Explosion Prevention
All fuels, most lubricants and some coolant mixtures are
flammable.
Do not smoke while refueling or in a refueling area.
Do not smoke in areas where batteries are charged, or
where flammable materials are stored.
When starting from an external source, always connect
the positive (+) boost cable to the positive (+) terminal of
the battery of the engine to be started.
Attach the negative (-) boost ground cable last, away
from the battery. See "Starting With External Source" for
specific instructions.
Clean and tighten all electrical connections. Check daily
for loose or frayed electrical wires. Have all loose or
frayed electrical wires tightened, repaired or replaced
before operating the machine.
Keep all fuels and lubricants stored in properly marked
containers and away from all unauthorized persons.
Store all oily rags or other flammable material in a
protective container, in a safe place.
5
