TM 5-3805-263-14&P-3
f. Dimensions and other pertinent data:
(1) Height, top of ROPS - 121.5 inches (3.103m)
(2) Height, top of stack - 126 inches (3.216m)
(3) Height, sectionalized configuration - 90.9 inches (2.31m)
(4) Length, overall (maximum) - 331.2 inches (8.395m)
(5) Length, sectionalized configuration (power section) - 126 inches (3.2m)
(6) Length, sectionalized configuration (fwd section) - 234.75 inches (5.96u
(7) Wheel Base - 233 inches (5.918m)
(8) Width overall (maximum) - 144 inches (3.657m)
(9) Width, outside wheel to wheel - 95.5 inches (2.399m)
(10) Center of gravity, non-sectionalized (from center tandem drive forward) - 73.83 inches (1.862m)
(11) Center of gravity, sectionalized (from power section, center tandem drive back) - 6 inches (152.4mm)
(12) Center of gravity, sectionalized (forward section, from center line front axle back) - 82 inches (2.08m)
(13) Moldboard lift above ground - 17.25 inches (440mm)
(14) Moldboard shoulder reach (maximum):
Frame straight - 73.5 inches (1.55m)
Crab position - 110.5 inches (2.49m)
(15) Turning radius (minimum) - 288 inches (7.3m)
g. Steering System. The articulated frame, sharp turning front wheels and optional drive train differential provide
excellent maneuverability and short turning radius. Steering is fully hydraulically assisted.
h. Tires. All tires are traction type (G02) nylon, tubeless 13.00 x 24, rated at 10 ply. Tires are inflated to 35 psi - 240
kpa.
Electrical System. The grader has a 24 volt negative ground electrical starting and lighting system with necessary
fuses and circuit breakers. All central switches are located on the dash within reach of the operator.
2
