TM 5-3805-263-14&P-3
Cutting Edge and End Bits
Cutting Edge
3.
Install a new cutting edge. Use new bolts if old
bolts are damaged.
CAUTION
To prevent damage to the moldboard, replace the
cutting edge when the moldboard can contact the
ground with the blade tipped fully back.
End Bits
1.
Remove the end bit bolts. Remove the end bit.
1.
Lower moldboard onto blocks. Stop engine.
2. Install new end bits. Use new bolts if old bolts are
2.
Remove cutting edge bolts. Remove cutting edge.
damaged.
5-19
