OPERATOR'S STATION
TM 5-3805-263-14&P-3
BLADE LAMPS
The 1 M5898 Blade Lamps receive power through the 60 amp circuit breaker, a
15 amp fuse and a 7N8000 Toggle Switch.
Figure 13. Blade Lamp Circuit
TURN SIGNAL CIRCUIT
The circuit for the right hand and left hand turn signals has a three-position
9G5589 Switch which sends power to the turn signal lamps. When the switch is in
position 2, power goes through the 60 amp circuit breaker, a 10 amp fuse, the
8D6946 Flasher and the 9G5589 Switch to the right hand turn signal lamps (IM5899).
When the switch is in position 3, power goes through the 60 amp circuit breaker,
a 10 amp fuse, the 8D6946 Flasher and the 9G5589 Switch to the left hand turn
signal lamps (IM5899).
The 8D6946 Flasher makes the lights go ON and OFF.
4-53
